主要产品：
GR202系列高温高压染色机
DF241系列高温高压染色机
DF241系列高温高压染色机
DF241系列高温高压染色机
GR202-1-3kg高温高压染色机
WGR202系列高温高压绞纱染色机
DQ型高温小样染色机
GR202高温高压染样机
Y5-1500系列液流式绞纱染色机
YC（B）1/2-80系列喷射式绞丝染色机
GD-3S-500系列成衣染色机
MF-960筒子纱快速烘干机
拉链烫平机
DC绞纱连续烘干机
|
 |
GR202系列高温高压染色机
用途：
主要供棉．毛，化纤等绞纱、筒子或散纤维的染色以及煮炼、漂白，水洗等各工序的应用。
工作温度：130℃量高工作压力：o.4Mpa
浴比1:15
换热方式：采用盘管式焕热器，可供加热之用，也可供冷却水需。
换热速率：当供热蒸汽压力为o.4Mpa时．槽液由20℃升到130℃时需40分：当冷却水压为o.3Mpa．水温为20℃时，槽液由130℃降到80℃时需40分。
染液循环方式：由离心泵中的换向调流装置，由气缸来调节染液的正反循环。
锅体密封方式：采用自封式橡胶封带，由缸内工作压力将橡胶封带贴紧在缸口法兰锥面上．达到密封或气顶式。
锅盖启开方式：先打开安全保险气阀、卸去锅内压力，待排气阀无气体向外排出，压力表值为零时，退出扳手柄打开夹箍．脱离法兰，采用重锥进行启盖，反之即为关盖。
It is mainly designed for the
application of dyeing. boiling off bleach, and water washing, etc. working
procedure for reeled yarn, bobbin scttered fibre on the cotton, matt, or
chemical fibre processing machine. Machine type: Vertical cylinder type Working
capacity (Refer to the specification list) Working temperature: 130℃ Max working
pressure: 0.4Mpa Both ratio: 1:5 Heat exchanging method: Adopt coil type heat
exchanger, which can be used fbr heating and also can be used for cooling Heat
exchanging spced. When the heating steam pressure is 0.4Mpa.
40minutes will be required for the liquid inslde the dyeing beck raising from
20℃ to 130℃. When the cooling water pressure is o.3Mpa and the water temperature
is 20℃, 40 minutes will be required for the liquid inside thedyeing beek
lowering from 130℃ to 80℃. Recycling method of dyeing liquid: The positive and
negative recycling ofdyeing liquid will be adjusted by the cylinder through the
switching device inside the
cenritfugal pump.Sealing method of boiler body: Adopt self-sealing type rubber
adhesive tape. The working pressure inside the boiler will make the rubber
adhesive tapeclosey attaching to the flange connoid surface of the boiler mouth
so as to reaize the sealing or air-jacking target.
Opening method of boiler cover: Firstly open the safety insurance air valve
torelease the pressure insde the bailer. When there iS no air exhausted from the
exhaust valve and the reading of pressure gauge iS zero, withdraw the wrench
handle. open the clamping hoop to remmove thellangeand then open the cover with
drag weighl. the cover will be closed. Overall size: Refer to the specification
list.
主要特点：
专为染色机而设计的温度控制器：
可储存120个染色程度和120个步骤：
可同时显示温度曲线、步骤和输出：
可进行温度控制、曲线加料、速度控制和PH控制等：
自动调整PID值参数(AUT0-TUMING)：
按不同染料的要求．可曲控制进水、洗水和排水的数量：
平行功能：可同时控制多个程序的操作．以减少染色程序的时间
Mailll Features:
Temperature controller specially designed for dying machine.
Storage of 120 dying programs and I 20 steps is possible.
Temperature curt'e, step and output may be simultaneously displayed.
Control over temperature, material loading, speed and PII values.
Automatic PID parameter tuning.
Water inflow, water drain, water rinsing amount can be controlled according to
different dyeing requirements.
Parallel function: simultaneously control multi- program operation to reduce
time of dying program.
工作容量：
| 型号Model |
GR202-5 |
GR202-10 |
GR202-25 |
GR202-50 |
GR202-100 |
| 工作容量Working Capacity(kg) |
5 |
10 |
25 |
50-75 |
100-125 |
外型尺寸：（单位：mm）
| 机型Model 尺寸Size |
GR202-5-10 |
GR202-25 |
GR202-50 |
GR202-100 |
GR202-200 |
| 宽Width |
800 |
1000 |
1200 |
1300 |
1400 |
| 高Heiht |
1850 |
2730 |
2789 |
3220 |
3400 |
|
